2M 78 Verso

The 2M 78 Verso is designed specifically for bottom mount headshells, making it an ideal solution for turntables that require mounting from underneath the headshell.

Journey back in time with the 2M 78 Mono Cartridge, specially designed for playing 78 rpm shellac records. Immerse yourself in the authentic nostalgia of mono recordings brought to life with impressive precision and fidelity.

The cartridge features a spherical diamond stylus, specially designed to properly track the wider grooves of 78 rpm shellac records, ensuring accurate playback and reduced groove wear.

Variants

€169,00
Find nearest dealer

Free Shipping on orders over €80

OverviewFeaturesReviewsSpecifications

2M 78 Verso

Authentic
nostalgia

Made for Mono

Stylus

The 2M 78 features a stylus' tip with a Spherical diamond, perfect for playback of 78 rpm shellac records. These unique records necessitate a larger stylus profile, and the 2M 78 flawlessly accommodates this requirement, ensuring optimal playback quality and preserving the authenticity of your cherished collection.

Enjoy true mono

Output

The 2M 78 uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.

Universal fit

Compatibility

The 2M Series is designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. 

The 2M Series are available in four different product variant configurations: the 2M for most common turntables on the market; the 2M Premounted, for customers who wish direct and easy mounting and replacement on their S-shaped tonearm; the 2M Verso, for bottom mount headshells; and the 2MR, which is designed cartridge housing tailored for turntables and tonearms like Rega, matching their requirement for low-form factor cartridges.

How to replace M2.0 mm screws on 2M Verso

Replacement guide

  1. Remove the stylus with the stylus protection guard from the cartridge body to avoid damaging the diamond.
  2. Using the Torx 8 key, unscrew the black screw from the Verso top plate.
  3. Gently detach the top plate by pulling the screws.
  4. Remove the two countersunk screws from the top plate.
  5. Insert the two M2.0 mm screws in the top plate.
  6. Attach the top plate to the cartridge body by flipping it 180 degrees.
  7. Mount the black screw in the top plate and tighten with appropriate force.
  8. Mount the cartridge on the tonearm using the enclosed tool.
  9. Mount the stylus with the stylus protection guard on the cartridge body.

Sensational schellac!

“… Well thought out MONO, standard groove version of respected 2M Series of cartridges ...
- Detailed sound
- Low surface noise
- Fast and punchy rhythmus
- Excellent tracking at the recommended 1.8 g“

Tony Bolton

Hi-Fi World April 2013

Specifications
  • Output voltage at 1 kHz, 5cm/sec
    4 mV
  • Frequency response 20 Hz - 20 kHz
    3 / - 1 dB
  • Tracking ability at 315 Hz
    70 µm
  • Compliance, dynamic, lateral
    18 µm/mN
  • Stylus type
    Spherical
  • Stylus tip radius
    R 65 µm
  • Tracking force range
    1.6-2.0g (16-20 mN)
  • Tracking force, recommended
    1.8 g (18 mN)
  • Tracking angle
    20°
  • Internal impedance, DC resistance
    700 Ohm
  • Cartridge colour
    Black/Grey
  • Cartridge weight
    7.2 g
  • Premounted cartridge weight
    16.7 g
  • Recommended load resistance
    47 kOhm
  • Internal inductance
    350 mH
  • Recommended load capacitance
    150-300 pF
    • Download user guide

Cartridge Dimensions

Open Dimensions Chart

Everything you need for your setup

Seeking an enhanced experience?