Technical data
Technical data
| Technical data | TMH 30 H | TM 20 H | TM 14 H | TMC 200 |
| Cartridge weight | 6 g | 6 g | 6 g | 6 g |
| Stylus type | Fine Line, Nude | Fine Line | Elliptical | Fine Line |
| Equivalent stylus tip mass | 0.35 mg | 0.45 mg | 0.5 mg | 0.5 mg |
| Frequency response | 20-20.000 Hz | 20-20.000 Hz | 20-20.000 Hz | 20-35.000 Hz +/- 2 dB |
| Output voltage at 1000 Hz, 5cm/sec. | 3.5 mV | 3.5 mV | 4.5 mV | 0.09 mV |
| Channel separation at 1 kHz | 25 dB | 25 dB | 25 dB | > 25 dB |
| Channel balance at 1 kHz | 1.5 dB | 1.5 dB | 1.5 dB | < 1.5 dB |
| Compliance, dynamic (lateral) | 35 µm/mN | 35 µm/mN | 30 µm/mN | 13/13* µm/mN *vertical |
| Tracking force | 12.5 mN (1.25 g) | 12.5 mN (1.25 g) | 12.5 mN (1.25 g) | 12.5 mN (1.25 g) |
| Tracking ability (315Hz, lateral) | 90 µm | 80 µm | 75 µm | 70 µm |
| Tracking angle (vertical) | 20° | 20° | 20° | 20° |
| DC resistance | 600 Ohm | 600 Ohm | 800 Ohm | _ |
| Inductance | 500 mH | 500 mH | 750 mH | _ |
| Recommended load resistance | 47 kOhm | 47 kOhm | 47 kOhm | _ |
| Recommended load capacitance | 200 pF | 200 pF | 200 pF | _ |
| Replacement stylus unit | Type 30H | Type 20 H | Type 14 H | _ |
| FIM distrotion at recommended tracking force DIN 45.542 | _ | _ | _ | < 1% |
| Internal impedance DC resistance per channel | _ | _ | _ | 3 ohm |
| Load impedance | _ | _ | _ | > 10 ohm |